Filter
Top Products
Contents
i
Contents
1 Introduction 1
2 Getting Started 1
PART I Your SummitView™ System 2
3 Overview 2
3.1 Your SummitView™ Essentials Kit and SV-551 ALC 2
3.2 Quick Start Configuration Setup 3
3.3 8-Step Essentials Kit Quick Installation Guide 4
PART II The SV-551 SummitView™ Processor/Switcher 6
4 Defining the SV-551 SummitView™ Processor/Switcher 6
4.1 DDC Support 9
PART III Detailed Installation Instructions 10
4.2 Defining the RC-63DL Room Controller 10
4.3 Defining the SV-301 and SV-302 Wall Plates 12
4.4 SV-301 and SV-302 (U.S.) 13
4.5 SV-301 and SV-302 (England and Europe) 14
4.6 Connecting the Wall Plates 15
4.7 Operating the SV-551 Remotely 17
5 Installing Optional Ceiling Speakers 18
5.1 Choosing the Best Location 18
5.2 Cutting the Ceiling Tile 18
5.3 Installing the Closed-back Ceiling Speakers 19
5.4 Painting the Speaker 23
5.5 Connecting Several Speakers 23
5.5.1 Adjusting the Tap Selector 24
5.6 Connecting the SV-551 SummitView™ Processor/Switcher 25
5.7 Operating the SV-551 Remotely 26
5.8 Installing the SV-551 in a 19” RK-551 Rack (Option) 27
PART IV Further information 28
6 ADA Requirements 28
7 Customizing the Controllers' Buttons and Labels 30
7.1 Backlit Buttons 30
7.2 Button Labels Sheet 31
8 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors 31
8.1 Wiring the CAT 5 RJ-45 Terminals (U.S.) 32
8.2 Wiring the Terminal Block Connector (England and Europe) 32