Filter
Top Products
26
1. In stop mode, press the PROGRAM button to enter
program registration mode. The programming display
appears on the TV screen and the front panel display.
2. Use the number button (0-9) on the remote control to
key in the track numbers you wish to program. For
single digit track numbers press ‘0’ first and then
the track number. For example to program track
number 7, press ‘0’, ‘7’. If the track number is 10 or
higher press the corresponding two buttons on the
remote. For example to program track number 15,
press “1”, “5”. Each time you press the number
buttons the program number display automatically
advances to the next number.
The maximum number of tracks that can be
programmed is 20. If you exceed that number the
“Full” indicator will appear on the TV screen and the
front panel display.
3. After you have completed the above program
registration, press the PLAY button to start programmed
playback.
Note:
If you press the STOP button or other foreign
buttons in the program setting mode, the system will
interrupt and exit the program setting mode.
4. In program play mode, press the STOP button to stop
program play, but the program sequence remains in
memory.
Notes:
The program remains even after the program play
ends. When you press the PLAY, you can play the
same program again.
You can do repeat play of the programmed tracks by
pressing the REPEAT button while in the program play
mode.
5. To cancel the program from the memory after the
disc has stopped press the PROGRAM button twice.
The Program indicator on the front panel display will
disappear.
Notes:
The program sequence is also cancelled when:
- you open the disc tray.
- you turn the power off.
Program Play (Audio CDs Only)
You can play the contents of the disc in the order you
want by arranging the order of the tracks on the disc to
create your own program. One program can be stored
in the system and contain up to 20 tracks.
Notes:
This function is not available for DVD and MP3 disc.
We recommend that you turn your TV ‘On’ while
programming a CD since the Program Numbers only
appear on the On Screen TV Display. They do not
appear on the front panel display. Once you begin
programmed playback you can shut the TV ‘Off’.
You cannot program a DVD disc or a CD containing
MP3 compressed audio files.