Filter
Top Products
20
Presetting Radio Stations
You can preset up to 30 of your favorite AM and FM
stations, in any combination, in the tuner memory for
easy recall.
1. Press the ON/STANDBY button on the front panel or
the POWER button on the remote control to turn
the system ‘On’.
2. Press either the TUNER button on the front panel or
the FUNCTION button on the remote control to select
the Tuner function. Press again to switch between
AM and FM bands if necessary.
3. Tune to the first station you wish to preset by either
the Manual or Automatic tuning method as follows:
Manual Tuning - repeatedly press the TUNING + or -
buttons on the remote control until the desired
frequency appears on the display. (Note: You must
use manual tuning if your are trying to tune to a
weak station.)
Automatic Tuning - press and hold the TUNING + or -
button on the remote control until the display begins
to scan down or up, and then release the buttons. The
Tuner will stop on the first strong station it finds. Repeat
this process until it stops on your desired station.
4. When the desired station appears on the display
(Example: FM 103.50 MHZ) press the MEMORY button
button on the front panel. (Note: There is no MEMORY
button on the remote control.) The PRESET indicator
and channel “01” indicators will flash in the display for
5 seconds.
When the indicators stop flashing, the station is
memorized in Preset Memory number 1.
5. Repeat step 3 to tune to the next station to be
memorized. Press the MEMORY button on the front
panel and while the PRESET and channel “01”
indicators are flashing press the TUNER STATIONS +
or - buttons on the remote control to select preset
channel memory number “02” or any other preset
number from 02 to 30. When the indicators stop flashing
the station is memorized.
6. Repeat step 5 until you have stored up to 30 stations
in the tuner memory.
Recalling Preset Stations
1. Turn the system ‘On’ and select the Tuner function.
2. Press the SELECT button on the front panel or the
TUNER STATIONS + or - buttons on the remote to
scroll through all of the preset station memories to find
your desired station.
You may also use the number keys on the remote control
to go directly to any of the preset stations. To select
preset stations 1 through 9, press the corresponding
number button. To select stations from 10 to 30, press
the corresponding two number buttons.
Changing Preset Stations
Tune to the new station you want to memorize. Press
the MEMORY button on the front panel. While the
PRESET and “01 CH” indicators are flashing, press the
TUNER STATIONS + or - buttons to select the memory
number you wish to change. When the indicators stop
flashing the new station is now memorized and the
previous station is deleted.
Last Station Memory
The Tuner always remembers the last station that you
were listening to before you switched to a different
function or shut the power ‘Off’. It will return to that same
station when you turn the system ‘On’ again and select
the Tuner function.
Note: If the AC power is disconnected for an extended
period of time all of the stations in the tuner memory
may be deleted. You will have to store them in
memory again when power is restored.