Kenwood TM-V71A Stereo System User Manual


 
89
OPTIONS
The following options are available for use with this transceiver:
DFK-3D
Detachable Front Panel Kit (3 m)
MC-45 Microphone
MC-59 Microphone with keypad
MCP-2A Memory Control Program
(web download software)
MJ-88 Microphone Plug Adapter
MJ-89 Modular Plug Microphone
Switch
PG-2N DC Cable (2 m)
PG-20 DC Cable (7 m)
PG-3B Noise Filter
PG-5A Data Cable
PG-5G Programming Interface Cable
(2 m)
PG-5H PC Interface Cable Kit (2 m)
PG-5F Extension Cable Kit (4 m)
PS-33 DC Power Supply
PS-53 DC Power Supply
SP-50B External Speaker
VGS-1 Voice Guide & Storage Unit
Note: Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.
MEMORY CONTROL PROGRAM MCP-2A
The following functions can be set only by using the MCP-2A software:
SQC active condition
Microphone sensitivity level
10 MHz mode selection
Power on password value
Using the MCP-2A software, you can:
View memory channel groups
Name memory groups
Name PM channels
Save/load settings
Read exported TravelPlus for Repeaters
files issued from the ARRL
Print/export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-2A software, go to:
http://www.kenwood.com/i/products/info/amateur.html
Note: This URL may change without notice.
n Using the MCP-2A Software
1 Follow the directions of the installer to install the software.
2 Set up the PC COM port and baud rate.
3 The transceiver data is read from the MCP-2A software.
4 Select your desired settings, then write the data to the transceiver.