Kenwood TM-V71A Stereo System User Manual


 
88
Menu Mode:
1 Enter Menu mode and access Menu 999 (RESET) {page 20}.
2 Set the reset type to VFO, PART, PM, or FULL.
3 Press the Tuning control to set the reset type.
A confirmation message appears on the display.
Press [TONE] (BACK) to return to the previous display or [F] (ESC) to cancel the
reset.
4 Press the Tuning control again to perform the reset.
Note: When the Channel Display function or Key Lock function is ON, the transceiver reset cannot
be performed.