Kenwood TM-V71A Stereo System User Manual


 
32
MEMORY CHANNELS
In Memory channels, you can store frequencies and related data that you often
use. Then you need not reprogram the data every time. You can quickly recall a
programmed channel by simple operation. A total of 1000 Memory channels are
available for bands A and B.
SIMPLEX & REPEATER OR ODD-SPLIT MEMORY CHANNEL?
You can use each memory channel as a simplex & repeater channel or as an odd-
split channel. Store only one frequency to use as a simplex & repeater channel or
two separate frequencies to use as an odd-split channel. Select either application
for each channel depending on the operations you have in mind.
Simplex & repeater channels allow:
Simplex frequency operation
Repeater operation with a standard offset (if an offset direction is stored)
Odd-split channels allow:
Repeater operation with a non-standard offset
The data listed below can be stored in each Memory channel:
Parameter
Simplex &
Repeater
Odd-split
Receive frequency
Yes
Yes
Transmit frequency Yes
Receive frequency step size
Yes
Yes
Transmit frequency step size Yes
Offset direction Yes No
Tone ON/OFF Yes Yes
Tone frequency Yes Yes
CTCSS ON/OFF Yes Yes
CTCSS frequency Yes Yes
DCS ON/OFF Yes Yes
DCS code Yes Yes
Reverse ON/OFF Yes No
Memory channel lockout Yes Yes
Memory channel name Yes Yes
Modulation/Demodulation mode Yes Yes