Filter
Top Products
60
n Transmitting EchoLink Memory
1 Select the band and frequency of the node to which you want to connect.
2 Press and hold the microphone [PTT].
3 While transmitting, press the Tuning control.
• The last called EchoLink DTMF Memory channel name and number appears on
the display.
4 While still transmitting, rotate the Tuning control to select your desired
EchoLink Memory channel, then press the Tuning control to set the
channel.
• The stored code scrolls across the display and is transmitted.
• The code will be transmitted even if you release
[PTT] before the entire code has
scrolled across the display.
• When only a name has been stored, the DTMF code for that name appears on
the display. The Call Sign code is automatically preceeded with a “C” and ends
with a “#”. DTMF values are listed in the following table:
1 2 3 4 5 6 7 8 9 0
0
1 2 3 4 5 6 7 8 9 0
1
Q A D G J M P T W
2
Z B E H K N R U X
3
C F I L O S V Y
So, for example, if the Call Sign being transmitted was JA1YKX, the display
would read: C 51 21 10 93 52 92 #
However, if characters other than letters or numbers are used (such as a hypen
of a space), only the DTMF code for characters before that non-regular character
are displayed. All subsequent characters will not appear on the display.
• If no data is stored in the selected channel, the frequency display is restored.