Filter
Top Products
69
SWITCHING FM/AM MODE
This transceiver is also capable of receiving (not transmitting) in AM on band A.
The default mode on the 118 MHz band is AM while the default on the 144, 220,
300, or 430/440 MHz band is FM.
1 Enter Menu mode and access Menu 102 (MODLAT) {page 20}.
2 Set the mode to AM, FM, or NFM.
Note: You cannot switch between FM and AM to receive on band B.
BEAT SHIFT
Since the transceiver uses a microprocessor to control various transceiver
functions, the CPU clock oscillator’s harmonics or image may appear on some
spots of the reception frequencies. In this case, we recommend you turn the Beat
Shift function ON.
1 Enter Menu mode and access Menu 108 (B.SHIFT) {page 20}.
2 Set the Beat Shift to ON or OFF.
SPEAKER MUTE
While receiving or transmitting on the TX band, you may not want to hear audio
received on the other band. Use this function to mute the speaker allocated to
that band (not the TX band).
While receiving, press [F], [LOW] to switch the mute function ON or OFF.
• The icon appears on the display when the function is ON.