Filter
Top Products
25
5-TONE SIGNALLING
5-Tone Signalling is either activated or deactivated by
your dealer.
5-Tone Signalling only opens the squelch when the
transceiver receives five tones corresponding to those
set up in your transceiver. When the squelch opens,
you will be able to hear the caller without any further
action.
After a correct 5-Tone signal is received and the squelch
opens, pressing the key programmed as Monitor will
cancel the connection.
If your dealer programmed Transpond for 5-Tone
Signalling, your transceiver will automatically send an
acknowledgment signal to stations that called you with
the correct signal.
Note:
This transceiver is also capable of decoding 2-Tone signals.
However, you cannot make 2-Tone calls unless 2-Tone Signalling has
been activated by your dealer.