Filter
Top Products
17
■ Dialling Stored DTMF Numbers
To call a number stored in a memory location:
1 Press the key.
• “A” appears on the display.
2 Enter the desired memory location number (1 ~ 9).
• The stored digits are displayed.
3 Press the PTT switch.
• If programmed by your dealer, no DTMF tone will
sound when “D” is transmitted. “D” is used for a
pause time. The pause duration is programmed by
your dealer.
■ Clearing Stored DTMF Numbers
To clear the numbers from a memory location:
1 Press the # key twice.
• “D- CLR” appears on the display.
•To cancel the process, press any key other than
1 ~ 9.
2 Enter the desired memory location number (1 ~ 9).
■ Redialling
You can redial the last number you transmitted (16
digits maximum).
1 Press the key, then press the 0 key.
• “A” and the digits are displayed.
2 Press the PTT switch.
Note:
Switching OFF the transceiver power clears the redial
memory.