Kenwood TK-270G Radio User Manual


 
23
2-TONE SIGNALLING
2-Tone Signalling is enabled or disabled by your dealer.
This function turns the transceiver optional signalling
OFF only when it receives the 2-tone signal that has
been set up in your transceiver. Transceivers that do
not transmit the correct tones will not be heard.
Your dealer may also activate Group Call for your
transceiver. Ask your dealer for details.
Receiving
When you receive a signal containing the correct
tones, optional signalling turns OFF and you will hear
the call.
“CALL” appears on the display and the LED indicator
flashes orange.
If your dealer has programmed the transceiver to turn
the squelch OFF, you can mute the speaker by
pressing the key programmed as Monitor or Squelch.
•Your dealer can program optional signalling and
squelch to automatically turn back ON after a specific
time period elapses.
If Transpond for 2-Tone Signalling is programmed, an
acknowledgment signal is returned to the calling
station. Transpond for 2-Tone Signalling can transmit
an alert tone only.
If Tone Alert for 2-Tone Signalling is programmed, an
alert tone will sound when the correct tones are
received.