Filter
Top Products
55
EN
Application
section
Timer
7 Execution
8
Press the TIMER key on the re-
mote repeatedly until "O.T.T." is lit.
9
Press the POWER key to
switch the power off to the
STANDBY mode.
The STANDBY/TIMER indicator lights
green.
The O.T.T. timer is activated and play-
back will start when the set ON time
comes.
To cancel O.T.T. timer :
Press the TIMER key on the remote repeat-
edly until "O.T.T." turns off.
To re-execute O.T.T. timer with the same
setting as before :
(1) After preparing the source to be
played, press the TIMER key on the
remote repeatedly until "O.T.T." is lit.
(2) Press the POWER
key to switch
the power off to the STANDBY mode.
To check or change the timer setting :
Restart the procedure from step 1 again.
÷ Be sure to adjust the time of the day (page 7)
before using the timer functions.
÷ When the STANDBY/TIMER indicator is
blinking in green, the timer setting or clock
setting is erroneous. Check and correct them
as required (pages 7 & 54).
÷ The O.T.T. timer cannot be used for program
playback of CD or MD.
÷ Even when the O.T.T. timer is canceled, pre-
viously made setting is stored in memory and
remains until new timer information is set
the next time.
Continued on next page
\
EX. BASS
CD
"O.T.T." lit