Filter
Top Products
Using PowerTouch
83
How Do I Control Home Automation Equipment?
X-10 Home Automation
Using an X-10 Home Automation System, you can operate various items
in your home with just a few buttons on your PowerTouch. Dimming
lights and turning any non-audio/video equipment on or off is an easy
task with X-10. All that is required is an X-10 IR converter and X-10 lamp
control modules, which are sold separately.
For more information, see the manual for the particular device you want
to control.
To switch the video and audio outputs to Zone A or Zone B while
Zone A or Zone B is selected
1. Access either the HOME1 or HOME2 menu and touch
to open
the Home Automation menu:
2. Touch or ( or ) to switch Zone A (Zone B) on or
off.
The non-selected zone is grayed out and cannot be switched on or off.
When the
(Zone B Off) button is pressed while the video and au-
dio are output to Zone B only, the video and audio outputs are switched
off and the receiver is also turned OFF (STANDBY mode).
Menu displayed when Zone A is
selected
Menu displayed when Zone B is
selected