Filter
Top Products
21
Using PowerTouch
How Do I Adjust the Surround Modes?
To check the Surround Play Status
1. Touch
(Listen Mode) on the Quick Access menu to open the Lis-
ten Mode menu:
2. Touch . This displays the Input Signal Status screen, which shows
the signal being played:
During playback of Dolby Digital, MPEG or DTS signal, the surround
identification signal in the input is identified and displayed by means
of the L, C, R, SR, SB, SL, S and LFE icons.
L : Front left channel C : Center channel
R : Front right channel SR : Surround right channel
SL : Surround left channel SB : Surround back channel
LFE : Low frequency effect channel S : Surround channel
3. Touch to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.