Filter
Top Products
Using PowerTouch
75
How Do I Adjust PowerTouch’s Display?
Using PowerTouch to Dim or Brighten the Receiver’s Front Panel
1. Touch (SETUP) on the Quick Access menu:
2. Touch to make the receiver display illumination dim and
less noticeable. It is also possible to disable some indicators (THX,
DTS, D.R.I.V.E., DOLBY DIGITAL, MPEG, HDCD and Infrared remote
transmitter indicator) on the receiver. Each touch of the FL Dimmer
button switches the above as shown below:
1 Display/bright Indicators/enabled
2 Display/dim Indicators/enabled
3 Display/dim Indicators/disabled
Changing the Front Panel Display Mode
1. Touch
(SETUP) on the Quick Access menu.
2. Touch
.
A: Connected Device Input Mode
DVD : AUTO
B: Input Terminal Connected Device
VIDEO4 : DVD
C: Listen Mode
DOLBY DIGITAL
"Input Mode" is displayed only when a selector with digital input is se-
lected. When the input selector is PHONO or TUNER, the connected
device and listen mode are displayed alternately. (Switching between A
and C). "Input Mode" and "Connected Device" do not be displayed.