Filter
Top Products
36
Using PowerTouch
How Do I Operate Devices?
Controlling a device without altering the receiver's input selection
(Operations using the SHIFT button):
The transmission of operation signals from PowerTouch to the receiver
can be disabled with the HOME1 or HOME2 menu. This makes it pos-
sible, for example, to turn the VCR ON while listening to a CD.
Procedure:
1. Touch
(HOME1) or (HOME2) in the Quick Access menu to
display the HOME1 or HOME2 menu:
2. Touch button.
3. Touch the desired operation button within 3 seconds after above.
By touching the
button and executing an operation, any de-
vice can be controlled without sending the command signal to the
receiver.
The above operation is not available with devices connected using
the Kenwood system control cable.