Filter
Top Products
26
Using PowerTouch
How Do I Adjust the Surround Modes?
To set the Listen Mode manually
1. Touch (Listen Mode) on the Quick Access menu to open the Listen
Mode menu:
2. Select a Listen Mode you want.
Operation on the receiver:
Press the LISTEN MODE button inside the door repeatedly until the
desired listen mode is displayed.
After 5 seconds, the display of the set listen mode returns to the previ-
ous display.
• The available listen modes may be restricted depending on the input
signal and speaker setup.
• When the input mode is set to Full Auto, if the incoming signal is not
Dolby Digital, DTS, DTS-ES or MPEG, the listen mode reverts to the
last listen mode you selected for that input.
• When the speakers A are set to Off or speakers B are set to On, the
listen mode is switched to Stereo.
• Different listen modes can be selected for the different input devices.
The selected listen modes for the separate input devices are stored in
the memory.