Filter
Top Products
55
The vehicle ignition was switched on. For safety reasons, the turntable moves into the park position.
This operates however only if the green ignition cable for the turntable is connected to the vehicle
ignition and the turntable is connected to the power supply! As long as voltage is present at the ignition,
the connection to the CAP will remain disabled. This means the CAP cannot be operated.
SPECIAL MESSAGES FROM THE TURNTABLE
The turn table antenna has reached the mechanical stop or is jammed! Check whether the turntable
is obstructed (e.g. by a branch).
If the turntable encounters an obstruction,
the CAP reverses 10°. This allows the
obstacle to be removed more easily.