Filter
Top Products
53
You have three options for “parking” the antenna.
1. The antenna can be moved to park position by pressing the
button twice.
2. Press the
button to return to the main menu. The
buttons and
button allow you to
call up the submenus (“Settings”, “Antenna Confi guration”). Use the
buttons to navigate to
the sub-item “Move to park position”. Now press
to park the antenna.
3. When the ignition is operated, the antenna automatically moves to the park position! However,
for this to happen the green wire of the power supply cable must be connected to the ignition and
the turntable connected to the power supply (see “Connection Diagram”). Refer to the detailed
instructions for this in the CAP unit installation manual.
The antenna is moved to park position, and this is then confi rmed.
RESET/PARKING
PARKING THE TURNTABLE
The Antenna Confi guration menu
allows you to check whether
the antenna truly is in the park
position.