Filter
Top Products
17
INSTALLATION AND CONNECTION
BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE
The sequence of pictures shown illustrates all the necessary installation
steps that are required to install the turntable and the BAS 60 parabolic
refl ector on the roof of the vehicle.
The other detailed instructions in this installation and operating manual must also be followed!
Determination of installation location.
Caution! System has a turning
range of 162 cm (Ø). Drill hole with
Ø 38 mm. Deburr sharp edges
of hole.
Apply Sikafl ex
®
291 adhesive
to the spigot of the roof gland.
Insert the spigot into the hole
and secure it from below with the
knurled nut.
Unscrew screws (x 6, 10 AF) from
the mounting plate and remove the
mounting plate.
Place the turntable on prepared
wooden supports to protect the roof
of the vehicle.