Filter
Top Products
52
RESET/PARKING
Use the
buttons to navigate to the sub-item “Reset the turn table antenna” and then press
the
button. The following display appears:
Press the
button to acknowledge the displayed message. The antenna is reset and automatically
moves to park position. A further short message “Park position reached” appears. Press the
button to
exit the menu.
Note: Before exchanging any component of the system (such as the receiver) the turntable
should be moved to its park position by means of the “Reset the turn table antenna”
command. The “Reset” deletes all previously saved satellite positions. The satellite data in
the UFS 740 receiver are however retained.
Press the
button to return to the main menu. The
buttons and
button allow you to call up
the submenus (“Settings”, “Antenna Confi guration”).
RESETTING THE TURN TABLE ANTENNA