Filter
Top Products
English
Deutsch
Français
31 XM-EX90
5 Press ENTER.
The change made above is entered temporarily in the
memory. The display shows “EDITING”.
12345
Decrements by 1.
6 Press 0 to eject the MD.
The data in the memory is written in the MD before it is
ejected.
The display shows “UTOC writing” during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while “EDITING” is being displayed.
To exit editing:
Press EDIT before pressing ENTER in step 5, .
To restore the original tracks from the track
obtained by joining:
Use the DIVIDE editing function.
See “Dividing tracks (DIVIDE)” on page 28.
ENTER
INPUT
EN26-42.XM-EX90[J]/1 98.6.4, 0:09 PM31