Filter
Top Products
18 XM-EX90
Program playback
Desired MD tracks can be selected and played in the desired order.
Use the MD CONTROL buttons on the normal control button panel of the remote control unit.
1 Load an MD.
See “MD playback (Basic operation)” on page 14.
2 Press £ then immediately press 7.
This sets the numeric keys to the MD mode.
3 Press PLAY MODE to select PROGRAM.
The display shows “PROGRAM” and the PROGRAM
indicator lights up.
• If some tracks have already been programmed, the
track number and program number of each track will
be displayed.
Lights.
PROGRAM
Each press of PLAY MODE switches the play modes as
follows:
PROGRAM RANDOM Off (Continuous play)
• PLAY MODE can be pressed only in stop mode. Be
sure to stop MD before pressing PLAY MODE.
4 Select desired track numbers using the
numeric keys.
Up to 32 tracks can be programmed.
Track No. Program No.
PLAY MODE
1
2
3
4
5
67
89
10
+
10
EN14-25.XM-EX90[J]/1 98.6.4, 0:06 PM18