Filter
Top Products
21 XM-EX90
MD recording (Basic operation)
Audio from a variety of sources can be recorded by using either digital or analog input as required.
For the remote control operation, use the MD CONTROL buttons on the normal control button panel
of the remote control unit.
1 Load a recordable MD (Mini Disc).
2 Press REC PAUSE.
The MD recorder enters record-pause mode.
• If you are operating the remote control unit, press ¶.
Blinks.
1
REC
3 Select the input by pressing INPUT.
Each press of INPUT switches the inputs as follows.
DIGITAL 1 IN DIGITAL 2 IN ANALOG IN
DIGITAL 1 IN: Select to record the digital input from the
source component connected to the DIGITAL IN 1
optical jack. (This input jack is usually connected with
optional CD player.)
DIGITAL 2 IN: Select to record the digital input from the
digital source component connected to the DIGITAL IN 2
optical jack.
ANALOG IN: Select to record the analog input from the
analog source component (cassette deck, tuner, etc.)
connected to the ANALOG IN (REC jacks).
• The input level should be adjusted when the analog
input is recorded (see page 22 for the input level
control procedure).
The input level of the digital inputs does not need
adjustment.
4 Play the source to be recorded.
5 Press ‹/8.
Recording starts.
• If you are operating the remote control unit, press £.
Recording
Main unit Remote control unit
Main unit Remote control unit
CD RECREC PAUSE
INPUT
/CANCEL
Notes:
7 It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or
discs without the consent of the owner of copyright in the sound or video recording,
broadcast or cable program and in any literary, dramatic, musical, or artistic embodied
therein.
7 Carefully read the “Rules of Digital Dubbing”on page 50.
EN14-25.XM-EX90[J]/1 98.6.4, 0:06 PM21