Filter
Top Products
29
Assigning a track title during
playback or recording
A track title up to 64 characters can be assigned as you play or record the track.
1 Starts playback or recording the track.
2 Press TITLE on the main unit once or press TITLE/EDIT on
the remote control repeatedly until the title editing
display appears.
The display is divided into the title name area and the characters area.
You can select a character to be input to the title name from the characters area. For the
character to be input, see the “Character Layout Table” on page 26.
3 Input the track title name.
• Input the track title using the title editing buttons.
• For detailed description, refer to step 4 in “Assigning the disc title and track titles”
on page 27.
However, note that the function of 7STOP/CANCEL differs. 7STOP/CANCEL
acts to stop the MD.
4 Press ENTER on the main unit or the remote control unit.
The display shows “EDITING” and the TOC indicator lights up.
Next, the display shows the disc title name and then shows the track number and the
total playback time.
• If it is during playback, the track will be played repeatedly until ENTER is pressed.
Pressing ENTER stops the playback.
• If it is during recording, recording continues even after ENTER is pressed.
If ENTER is not pressed until the end of the track, the characters input before the
end of the track are recorded as a track title.
5 Press 0 on the main unit or the remote control unit to
eject the MD.
The data in the memory is written in the MD before it is ejected.
The display shows “UTOCwriting” during MD write operation.
• Be careful not to apply impact to the MD recorder during writing data in the
memory in the MD. Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also when the unit is switched to
Standby mode while “EDITING” is being displayed.
To exit editing:
Press TITLE on the main unit or TITLE/EDIT on the remote control unit before pressing
ENTER in step 4.
or
or
ENTER
or
Title name area
Blinks
Alternately blinks
Characters area
XM-228BK(B)-Eng. p.17-29 98.9.25, 4:23 PM29