Filter
Top Products
23
5 Press ENTER on the main unit or the remote control unit.
The change made above is entered
temporarily in the memory. The
display shows “EDITING” and the
TOC indicator lights up.
6 Press 0 on the main unit or the remote control unit to
eject the MD.
The data in the memory is written in the MD before it is ejected.
The display shows “UTOCwriting” during MD writing operation.
• Be careful not to apply impact to the MD recorder during writing data in the
memory in the MD. Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also when the unit is switched to
Standby mode while “EDITING” is being displayed.
To exit editing:
Press EDIT on the main unit or the TITLE/EDIT on the remote control unit before pressing
ENTER in step 5. Then, press the same button repeatedly until the editing track number is
displayed.
Erasing a track (ERASE)
A desired track can be erased from the MD. The track numbers after the erased track are
decremented automatically.
1 Press EDIT on the main unit or the TITLE/EDIT on the
remote control unit to select “ERASE”.
The ERASE indicator lights up.
Each press of the button switches the editing functions as follows.
• When TITLE/EDIT on the remote control unit is used, the disc title is displayed
after “ALL ERASE”.
2 Press SET on the main unit or the remote control unit.
“1” for track number 1 will blink
on the display.
3 Select the track number to be erased, then press SET.
Using the jog dial or 4 or ¢:
Select the track number by
turning the jog dial on the
main unit or 4 or ¢ on
the remote control unit.
Then press SET on the main
unit or the remote control unit.
DIVIDE JOIN MOVE
MD total playing time display (Disc title)
ERASE
ALL ERASE
Blinks
1
2
3
4
5
6
Blinks
Blinks
Blinks
1
2
3
4
5
6
Blinks
Example) When track No. 2 is to be erased
Blinks
1
2
3
4
5
6
Blinks
Blinks
Example) When SET is pressed
1
2
3
4
5
6
Blinks
SET
or
or
SET
or
6
1
2
3
4
5
or
ENTER
or
or
TITLE
/EDIT
XM-228BK(B)-Eng. p.17-29 98.9.25, 4:22 PM23