Filter
Top Products
10
XL-MC334BK
LVT0022-001B [J]
CONTINUE MODE PLAYBACK
Every loaded disc can be played back entirely in the numerical
order in the CONTINUE mode. After the playback of the last disc
ends, the playback begins again from the first disc.
Discs and tracks can be played back randomly from all the loaded
discs (RANDOM function).
One track can be played back repeatedly in the basic mode as well
as when the RANDOM function is selected (REPEAT-1 function).
The beginning of the first track of every loaded disc can be played
back for 15 seconds (INTRO function).
The reserve function can be used in the CONTINUE mode, allowing
you to reserve the following tunes (tracks) to be played back while
listening to music.
See “RESERVE FUNCTION” on page 20 for the details.
Basic mode
1. Select the mode.
<By the unit>
Press the PLAY MODE button as many times as required until
the display shows “CONTINUE”.
<By the remote control>
Press the CONTINUE button.
NOTE: Pressing the ¢ button when the last track is being
played back skips to the first track of the next disc.
However, pressing the 4 button when the first track
is being played back does not skip back to the previ-
ous disc.
Playing back discs in random
order
To playback every disc in the storage in random order, press the
RANDOM button while playback is stopped to show “RANDOM”
on the display. Then press the 3/8 button to start the Random
playback.
2. Select a disc you want to start playback with.
See “2 Selecting a disc” on page 8 about how to select a disc.
3. Select the track if you want to start playing the disc from a
specific track.
See “3 Selecting a track” on page 9 about how to select a track.
4. Press the 3/8 button to start playback.
PLAY MODE
or
CONTINUE
(Remote control)
5. Tracks can be skipped forward or backward during the playback
using the 4 or ¢ buttons. The playback can be paused or
stopped in the normal manner. For further information, see
“BASIC OPERATION” on page 7.
PLAY/PAUSESTOP/CLEAR
or
/
(Remote control)
/
CURSOR
<>
or
(Remote control)
RANDOM
or
RANDOM
(Remote control)
There is an approximately fifteen-second pause between tracks.
To cancel the function, press the RANDOM button again while
playback is stopped.
Playing back a track repeatedly
You can listen to a selected track of the selected disc repeatedly.
1. Press the REPEAT button to show “REPEAT 1” on the display.
2. Select the disc and then the track you want to listen to repeatedly.
3. Press the 3/8 button.
NOTE: You can also press the REPEAT button to show “RE-
PEAT 1” on the display during playback, to play back
the current track repeatedly.
To cancel the function, press the REPEAT button again, clearing
the indication from the display.
Playing back the beginning of
each disc
To scan the first tracks of all discs, press the INTRO button while
playback is stopped to show “INTRO” on the display, then press
the 3/8 button. The beginning part of the first track of each disc
will be played back for 15 seconds successively.
REPEAT
or
REPEAT
(Remote control)
To cancel the function, press the INTRO button again, clearing
the indication from the display.
INTRO
or
INTRO
(Remote control)