JVC XL-MC334BK CD Player User Manual


 
8
XL-MC334BK
LVT0022-001B [J]
Playing back discs
1 Selecting a playback mode
There are three main playback modes, namely CONTINUE, ONE
DISC, and PROGRAM; each has selective playback functions. (See
the following pages for the description of the playback modes and
functions.)
Select the mode using the PLAY MODE button on the front panel,
or the CONTINUE, ONE DISC, or PROGRAM button on the remote
control.
The current mode is shown on the display.
DISC
DISC
or
CONTINUE ONE DISC PROGRAM
or
(Remote control)
PLAY MODE
+10DISC
–10DISC–1DISC
+1DISC
2. To unload or change discs in other slots, turn the DISC/TRACK
jog dial or press the
/ / / buttons to specify the slot
number, which is shown as the “DISC” number on the display.
Then press the DISC EJECT button to raise the disc up.
(Remote control)
DISC/TRACK
DOWN
UP
TRACKDISC
or
(Remote control)
The selected disc number is shown on the display.
NOTE: To specify the disc or track numbers using the nu-
meric buttons, press the corresponding buttons from
higher digits. For example, press “5” then “2” for “52”.
Press “1”, “4” and then “8” for “148”.
In the operation above, the disc selection mode will
be canceled if you do not use the jog dial or numeric
buttons within 4 seconds after pressing the DISC
button.
Also, the selected disc will be canceled if you do not
execute step 3 or 4 below within 4 seconds after
using the jog dial or numeric buttons.
Method 2
Use the
/ / / buttons on the remote control.
The
( ) button increases (decreases) the disc number by
ten, while the
( ) button increases (decreases) the disc number
one by one.
Repeat this step to unload or change any additional discs.
3. When unloading or changing is completed, press the OPEN/
CLOSE button to close the door.
The carousel rotates to bring the disc at the loaded/unloaded
position (in the center of the storage area) to the playback
position.
2 Selecting a disc
Method 1
Press the DISC button, then use the DISC/TRACK jog dial on
the front panel or the numeric buttons to select a disc.
DISC/TRACK
DOWN
UP
+10DISC
–10DISC–1DISC
+1DISC
or
(Remote control)