24
Creating Realistic Sound Fields
B.SEARCH
REW FF
F.SEARCH
RETURN
TOP MENU
ENTER
VOLUME
MENU
VCR CHANNEL
TUNING
MUTING
123
45
6
78
9
0
REMAIN
PROGRAM
D.R.CZOOM
SETUP
DSP MODE
SLEEP
TEST
PRO LOGIC
SETTING
SOUND
CLEAR
REPEAT
ANGLE
SLOW
SEARCH
A-B REPEAT
PTY – PTY +PTY SEARCH
2 3
SOUND
4
To adjust the output level for the rear speakers
and the subwoofer.
1) Press SOUND repeatedly to select the
“REAR” or “SW.”
• Each time you press the button, the adjustment
indication on the display changes as follows:
REAR : To adjust the output level for rear
speakers (from –6 dB to +6 dB).
SW (Subwoofer) : To adjust the output level for subwoofer
(from –6 dB to +6 dB).
•“REAR 0dB” and “SW 0dB” are the initial setting. If you
have already changed the setting, another value will
appear.
2) Press 3 or 2 to adjust the
output level.
3 : Increases the output level.
2 : Decreases the output level.
3) Repeat 1) and 2) for setting
the other speakers.
SOUND
00 F 00
00 R 00 CEN
Normal indication
(canceled)
SW
REAR
SOUND
ENTER
3
To adjust the output balance for the front
speakers and the rear speakers
1) Press SOUND repeatedly until one of
the following adjustment indications
appears on the display.
• Each time you press the button, the adjustment indication
on the display changes as follows:
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
speakers.
•“00 F 00” and “00 R 00” are the initial setting (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
2) Press 3 or 2 to adjust the
output balance.
3 : Decreases the left speaker
output, or restores the right
speaker output.
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes
from OFF (silence), –06 (most reduction) to 00 (no
reduction).
3) Repeat 1) and 2) for setting the other speaker.
ENTER
00 F 00
00 R 00 CEN
Normal indication
(canceled)
SW
REAR
EN18-24TH-A30R[B]ff.pm6 02.7.2, 9:49 PM24