Filter
Top Products
9
Y/C
COMP.
Y/C
COMP.
MINMIN
MIN
MIN
1
TV
A
B
C
4
You can select one of three connection types—
A
,
B
, and
C
.
For using the composite video cord or S-video cord
• If your TV has S-video (Y/C-separation) jack, connect it using an
S-video cord (not supplied)
B
.
By using this jack, you can get a better picture quality than using
composite video cord connection
A
.
Note:
Keep the power cord away from the connecting cords and the antenna
cables. The power cord may cause noise or screen interference.
Y/C–COMP. selector
Y/C
COMP.
Now, you can plug the power cord of the center unit into the AC outlet.
Y/C
COMP.
A
B
C
S-video cord (not supplied)
Video cord (supplied) SCART cable (not supplied)
TV connection
The S-video cord and the SCART cable are not supplied with this system.
Use the cords or cables supplied with the other component or purchase them at an electric appliance store.
For using the SCART cable (
C
)
• If S-Video (Y/C-separation) is equipped for your
TV, set Y/C–COMP. selector of the center unit to
Y/C. You can get a better picture quality by using
S-Video (Y/C-separation) setting.
• If S-Video (Y/C-separation) is not equipped for
your TV, set Y/C–COMP. selector to COMP.
Illustrations below are
typical examples.
When you connect the TV,
refer also to its manual since
the terminal names actually
printed on the rear vary
among the components.
Note:
On the rear panel SCART cable is indicated as “AV OUT.” However,
this terminal is designed as video output. So, no sound comes out.
EN01-09TH-A30R[B]ff.pm6 02.7.2, 9:49 PM9