JVC TH-A30R Home Theater System User Manual


 
16
Speaker Settings
DISPLAY
B.SEARCH
DOWN
REW
UP
FF
F.SEARCH
RETURN
STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENU
TV
STANDBY/ON
AUDIO
VCR
VCR
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
123
45
6
78
9
0
REMAIN
PROGRAM
D.R.CZOOM
SETUP
DSP MODE
SLEEP
TEST
PRO LOGIC
SETTING
SOUND
CLEAR
REPEAT
ANGLE
SLOW
SEARCH
A-B REPEAT
RDS
DISPLAY
PTY PTY +PTY SEARCH
23
PRO LOGIC
SETTING
Setting the Delay Time
Adjust the delay time of the sounds from the center speaker and the
rear speakers, comparing to that of the sounds from the front
speakers. If the distance to the center speaker* and/or the rear
speakers** from your listening point is almost the same as from the
front speakers, select 00 MS (msec).
* You can adjust the delay time only when the DOLBY DIGITAL
or DTS indicator is lit on the display.
** You can adjust the delay time only when the DOLBY DIGITAL,
DTS, or PRO LOGIC indicator is lit on the display.
For Dolby Digital or DTS Digital Surround:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1
again.
1
Select and play a DVD encoded with Dolby
Digital or DTS Digital Surround.
2
Press SETTING repeatedly until one of
delay time indications (with the current
setting*) appears on the display.
Each time you press the button, the indication in the main
display changes as follows:
C–DLY (Center delay) : To register delay time for center
speakerfrom 0 msec to 5 msec
R–DLY (Rear delay) : To register delay time for rear
speakersfrom 0 msec to 15 msec
* The initial setting for the center speaker is 00 MS.
The initial setting for the rear speakers is 00 MS.
If you have already changed the setting, a different value will
be shown.
3
Press 3 or 2 to adjust delay
time.
3 : Increases delay time.
2 : Decreases delay time.
1 msec increase (or decrease) in delay
time corresponds to 30 cm increase (or
decrease) in distance.
4
Repeat steps
2
and
3
to adjust the
other delay time.
RDLYCDLY
Normal indication
(canceled)
ENTER
SETTING
EN10-17TH-A30R[B]ff.pm6 02.7.2, 9:49 PM16