Filter
Top Products
31
Creating Realistic Sound Fields
Activating Surround Mode
When Auto Surround is set to “OFF” or 2-channel source other than
Dolby Surround software is played back, activate Surround mode
manually.
Make sure that you have set the speakers information correctly
(see page 24 or 57).
• If only front speakers are connected, you cannot activate any
Surround mode.
On the front panel:
Press SURROUND ON/OFF.
The SURROUND indicator lights up on the display
(when Auto Surround is set to “OFF”).
• Each time you press the button, Surround mode is
activated or deactivated alternately.
From the remote control:
1
Press CONTROL repeatedly so that
“SOUND” appears on the operation
mode display.
Number buttons now work for sound adjustments.
2
Press SURR ON/OFF.
The SURROUND indicator lights up on the display
(when Auto Surround is set to “OFF”).
• Each time you press the button, Surround mode is
activated or deactivated alternately.
About SURROUND indicators
• When Auto Surround is set to
“ON,” the AUTO SURROUND
indicator always lights up on the
display.
• When you activate Surround
mode manually with Auto
Surround set to “OFF,” the
SURROUND indicator lights up
on the display.
Selecting Surround Modes
When 2-channel source is played back with Surround mode
activated, you can select another Surround mode.
Available Surround modes will vary depending on the number of the
connected speakers and the playback sound.
Make sure that you have set the speaker information correctly
(see page 24 or 57).
• You cannot change Surround mode when playing back DVD
AUDIO.
• If rear speakers are not connected, you cannot use DAP modes
and the All Channel Stereo.
On the front panel:
Press SURROUND MODE.
• Each time you press the button, Surround mode
is changed as illustrated below:
From the remote control:
1
Press CONTROL repeatedly so that
“SOUND” appears on the operation
mode display.
Number buttons now work for sound adjustments.
2
Press SURR MODE.
• Each time you press the button, Surround mode is
changed as illustrated below:
When 5 or 4 (except center speaker) speakers are connected:
When 3 (except rear speakers) speakers are connected or
Dolby Digital including matrix source is played back:
ON/OFF
SURROUND
MODE
REC MODE
DVD AUDIO/VIDEO RECEIVER
7
SURR ON/OFF
DIGITAL AUTO
AUTO
SURROUND
PRO LOGIC
LR
SUBWFR
DIGITAL AUTO
SURROUND
PRO LOGIC
LR
SUBWFR
CONTROL
ON/OFF
SURROUND
MODE
REC MODE
10/0
SURR MODE
DIGITAL AUTO
VOLUME
SURROUND
PRO LOGIC
LR
SUBWFR
PL II MOVIE PL II MUSIC
LIVE CLUB
HALL PAVILION
ALL CH ST.
DANCE CLUB
(back to the beginning)
DIGITAL AUTO
VOLUME
SURROUND
PRO LOGIC
LR
SUBWFR
PL II MOVIE PL II MUSIC
Signal indicators Speaker indicators
Signal and speaker indicators on the display
The following signal indicators light up —:
L, R : •When digital input is selected: Light up when
the signals corresponding to each channel come
in.
•When analog input is selected: Always light
up.
C, LS, RS : Light up when the signals corresponding to each
channel come in.
S:Lights up when the monaural rear channel signal
or Dolby Surround encoded signal comes in.
LFE : Lights up when the LFE channel signal comes
in.
The speaker indicators light up as follows:
• The subwoofer speaker indicator (
) lights up when
“SUBWFR” is set to “YES” (see page 24) or “USE” (see
page 57).
• The other speaker indicators light up only when the
corresponding speaker is activated, and also when required
for the current playback.
CONTROL
EN29-32RX-DV5SL[B]3.pm5 02.8.6, 6:01 PM31