Filter
Top Products
– 23 –
English
IMPORTANT:
• It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
•The recording level is automatically set correctly, so it is
not affected by the VOLUME +/–. Thus, during recording
you can adjust the sound you are actually listening to
without affecting the recording level.
• While recording, you can hear sound modes through the
speakers or headphones (see page 11). However, the sound
is recorded without these effects.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
•You can use only type I (Normal) tapes for recording.
To protect your recording
Cassettes have two small tabs on
the back to protect unexpected
erasure or re-recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
•Fading
• Incomplete erasure
• Difficulty in recording
To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.
To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and CD shops).
As the erase head of the unit is of magnetic type, do not
demagnetize it.
Recording
Recording onto a Tape on Deck A
On the unit ONLY:
1
Put a recordable cassette into the deck A with
the exposed part of the tape down.
• See also page 22.
2
Close the cassette holder gently.
3
Start playing the source—FM, AM*, disc
player, deck B, or auxiliary equipment
connected to AUX IN jacks.
• When the source is disc, you can also use Disc
Synchronized Recording (see page 24).
• When the source is the deck B, you can also use the
dubbing method. (See “Dubbing Tapes” on page 24.)
* See “To reduce the beat—Beat Cut” below.
4
Press REC ¶ for the deck A.
The recording starts.
To stop during recording, press STOP/EJECT 7/0 for the
deck A.
To remove the cassette, press STOP/EJECT 7/0 for the
deck A.
You cannot press REC ¶ in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
To reduce the beat—Beat Cut
If the beats are heard while recording an AM
broadcast, press FM MODE/BEAT CUT
repeatedly until the beats are reduced.
Each time you press the button, the display alternates
between “CUT – 1” and “CUT – 2”.
REC
Head
Capstan
Pinch roller
Erase head
(only for the deck A)
EN23-26_PC-X292V[US] 05.4.15, 1:34 PM23