JVC PC-X292V Stereo System User Manual


 
– 14 –
English
Playing Back Discs
Continued
Loading Disc
On the unit ONLY:
1
Press 0 OPEN on the disc door to open the
disc door.
2
Place a disc correctly with its label side up as
shown below.
3
Press 0 OPEN again to close the disc door.
Disc Information
This unit has been designed to play back the following
discs—CD, CD-R, CD-RW and VIDEO CD (VCD).
You can play back the discs containing the tracks in audio CD
format or MP3 files in ISO 9660 Level 1 or Joliet format.
In this instruction, we call a disc recorded MP3 files “MP3
disc,” “folder” is referred to as “group” and “file” is
referred to as “track.”
•This unit cannot play CD-I (CD-I ready), CD-ROM and
Photo CD.
When playing CD-Rs or CD-RWs
Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
finalized.”
This unit cannot play “multi-session” discs.
•This unit cannot play “packet write” discs.
Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player’s lens is dirty.
CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.
About color system
•This unit accommodates both NTSC and PAL system
and can playback discs recorded with either system.
To change the color system, see page 8.
Notes for MP3 files
•The unit can only recognize files with “MP3” or “mp3” as
the extensions, which can be in any combination of upper
and lower case.
This unit recognizes up to 256 folders (including the root
folder) and 640 files on a disc.
It is recommended that you record your material at a 44.1
kHz sampling rate, using the 128 kbps data transfer rate.
Some MP3 files or discs may not be played back because
of their characteristics or recording conditions.
MP3 discs requires a longer readout time than regular discs
because of the complexity of the folder/file configuration.
MP3i and MP3 Pro are not available.
•This unit supports ID3 Tag ver. 1/1.1.
General notes
In general, you will have the best performance by keeping
your discs and the mechanism clean.
Store discs in their cases, and keep them in cabinets or on
shelves.
•Keep the unit’s disc cover closed when not in use.
Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore, the
use of Non-DVD side of a DualDisc on this product may not
be recommended.
Playing Back the Entire Disc
You can play disc continuously.
1
Load disc.
2
Press CD.
“READING” appears on the display and TV,
then the unit starts reading a disc.
•When loading a VCD:Playback starts. (For VCD Ver.2.0
discs, the PBC function is activated—see page 21 to
activate or deactivate the PBC function.)
3
Press 3¥8.
Playback starts from the first track.
To stop during play, press 7.
To remove the disc, press 0 OPEN.
If “UN DISC” appears on the display when you load a
disc
This unit cannot play back the disc. (“UNKNOWN DISC” is shown
on the TV also.)
correct
incorrect
indicates types of disc available for
the operation. (Unavailable disc types are not shown.)
If “ ” appears on the TV when you press a button, the
disc cannot accept the operation you have tried to do.
EN14-22_PC-X292V[US] 05.4.15, 1:34 PM14