Filter
Top Products
– 17 –
English
To stop during play, press 7.
The unit stops Program play.
To check the program contents
Before playing, you can check the program contents by
pressing PROGRAM/SET.
• Each time you press the button, the programmed tracks are
shown on the display.
To add tracks in the program
1
Press PROGRAM/SET repeatedly until “0” appears as the
track number.
2
Enter the track number(s) you want to add by repeating
steps
3
and
4
on the left.
To edit the program
1
Press PROGRAM/SET repeatedly to show the program
number you want to edit.
2
Enter the track number you want by following steps
3
and
4
on the left.
To erase a programed track
1
Press PROGRAM/SET repeatedly to show the program
number you want to erase.
2
Press 4 or ¢ repeatedly until “0” appears as the track
number.
3
Press PROGRAM/SET.
To erase the entire program
Press 7 while the playback is stopped.
The PROG indicator goes off from the display.
•The programmed tracks are also erased in the following
cases:
– Pressing 0 OPEN to open the disc door.
– Changing the source.
– Turning off the unit.
If you cannot enter a track number
You are trying to program a track number that does not exist on the
disc (for example, selecting track 14 on a CD that only has 12
tracks).
After you have programmed 40 tracks
“– – FULL – –” appears on the display, and the program number
returns to “P:01”. Programming more tracks
overwrites the tracks
already programmed to those numbers.
OVER
Programming the Playing Order
of the Tracks—Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 40 tracks.
•To use Repeat play (see page 18) for Program play, press
REPEAT after starting Program play.
•Program play is not available when playing back a VCD 2.0
with the PBC function. (See page 21 for playing back a VCD
2.0 with the PBC function.)
1
Load disc.
• If the current playing source is not the disc player, press
CD before going to the next step.
2
Press PROGRAM/SET.
The PROG indicator lights up on the
display.
• “PROGRAM MENU” appears on the TV, then the
programming information appears on the TV.
3
Select a track from the disc.
Press 4 or ¢ to select the
track number.
•To program from MP3 disc, press
GROUP/PRESET UP or GROUP/PRESET DOWN to
select a group, then press 4 or ¢ to select a track in
the group.
On the remote control ONLY:
Press the number buttons.
•For how to use the number buttons, see
“To go to another track directly using
the number buttons” on page 16.
4
Press PROGRAM/SET.
5
Repeat steps
3
and
4
to program other tracks
if you want.
6
Press 3¥8.
The tracks are played in the order you have
programmed.
P
R
E
S
E
G
R
O
U
P
T
U
P
/
R
E
P
E
A
T
P
R
O
G
R
A
M
/
G
R
O
U
P
/
S
E
T
N
W
O
D
T
E
S
E
R
P
P
R
E
S
E
G
R
O
U
P
T
U
P
/
R
E
P
E
A
T
P
R
O
G
R
A
M
/
G
R
O
U
P
/
S
E
T
N
W
O
D
T
E
S
E
R
P
EN14-22_PC-X292V[US] 05.4.15, 1:34 PM17