Filter
Top Products
60
Reference
■For a connected USB device
■For a connected iPod
If this system does not work properly even after taking the action in the above “Possible solution”
Many functions of this system are controlled by microprocessors that can be reset by recycling the power
supply. If pressing any button does not result in the normal action, disconnect the power cable from the outlet,
wait for a while, and connect the power cable again.
Problem Possible cause Possible solution
Reference
page
Files on a USB device
cannot be played back.
If “CANNOT PLAY THIS
DEVICE” appears on the TV
screen, the files on a USB
device are not playable.
Check that the file types recorded
on the USB device are compatible
with this system.
53
MP3, WMA, WAV,
JPEG, ASF, DivX,
MPEG1 or MPEG2 file
cannot be played back.
The connected USB device
may include files of different
types (MP3, WMA, WAV, JPEG,
ASF, DivX, MPEG1 or MPEG2).
Select “FILE TYPE”. You can play
back only the files of the types
selected with “FILE TYPE”.
If the main unit has read the file
before you make the “FILE TYPE”
setting, reset “FILE TYPE” to the
desired file type, and then discon-
nect the USB device and connect
it again.
39
Problem Possible cause Possible solution
Reference
page
Content on an iPod can-
not be played back even
though “CONNECT” is
displayed in the display
window.
The battery of the iPod is run-
ning low.
Charge the battery.
45
The iPod cannot be con-
trolled from the main unit.
The iPod is not compatible with
the main unit.
Confirm the playable iPod type.
45
The iPod battery charge func-
tion is deactivated.
Activate the function.
The main unit does not
charge the iPod.
An item other than “IPod” is
selected as the source.
Select “IPod”.
44
45
TH-F3[J_C].book Page 60 Monday, March 17, 2008 11:45 AM