Filter
Top Products
Preparation
10
To view an image on the TV screen, select the
video signal type correctly according to the TV
after connecting the main unit to the TV.
■ IMPORTANT
• Slide the remote control mode
selector to [SHIFT].
1 Turn on the main unit.
• Refer to “Turning on/off the main unit” on
page 11.
2 Press [DVD 3] or [USB 3].
• When a disc is loaded or a USB device is
connected, press 7 to stop playback.
3 Press [SCAN MODE].
• The current video signal type appears.
Example: When “480I” is selected as the
video signal
4 Press 2 or 3 (cursor) to select the
video signal type suitable for the
TV.
• When the TV is connected to the [VIDEO]
terminal, select “480I”.
• When the TV is connected to the [COMPO-
NENT] terminals, select “480P”. (If the TV is
not compatible with a progressive video sig-
nal, select “480I”.)
• When the TV is connected to the [HDMI
MONITOR OUT] terminal, the video signal
type can be selected as instructed below.
- Select “AUTO” for normal usage. (the ini-
tial setting)
- Select “480P”, “720P”, “1080I” or “1080P”
as needed. (The selectable settings differ
according to the resolution of the con-
nected TV.)
• You can also select the video signal type by
repeatedly pressing [SCAN MODE].
NOTE
• “480”, “720” and “1080” refer to the number of
the scanning lines. Generally, the larger the
number, the better picture that can be obtained.
• “I” refers to the interlaced format. “P” refers to
the progressive format. A better picture can be
obtained in the progressive format than in the
interlaced format.
• When an HDMI video signal is output, the
“HDMI” indicator lights up in the display window.
• When an HD video signal is output, the “HD”
indicator lights up.
• When “480P”, “720P” or “1080P” is selected, the
“PROGRESSIVE” indicator lights up in the dis-
play window.
5 Press [ENTER].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after selecting
the video signal type. Most of the other functions
can be used when the remote control mode
selector is at [AUDIO].
• To check the compatibility of your TV, contact
your local JVC customer service center.
• Even if the main unit is turned off, the video sig-
nal type setting is stored.
Selecting the video signal
type
Remote control
mode selector
2/3 (cursor)/
ENTER
TH-F3[J_C].book Page 10 Monday, March 17, 2008 11:45 AM