JVC LVT1306-007A Home Theater System User Manual


 
43
When you select “AUTO SURR” (Auto Surround)
You can enjoy the Surround mode easily.
•For details about the Surround modes, see pages 38 and 39.
When “AUTO SURR” is activated, the AUTO SR indicator lights
up on the display.
How does “AUTO SURR” work?
If a multi-channel signal comes in, an appropriate Surround
mode will be selected automatically.
If a Dolby Digital 2-channel or DTS 2-channel signal with
surround signal comes in, “PLII MOVIE” will be selected.
If a Dolby Digital 2-channel or DTS 2-channel signal without
surround signal, or a Linear PCM signal comes in, “SURR
OFF (stereo)” will be selected.
NOTES
•“AUTO SURR” does not take effect in the following cases:
While playing an analogue source.
While selecting one of the fixed digital decode modes—
“DOLBY D” or “DTS” (see page 13).
While listening with the headphones, the 3D HEADPHONE
mode (see pages 39 and 41) is activated without respect to the
type of software played back.
When “AUTO SURR” is selected, sound may not come out at
the beginning of playback. If it occurs, select a Surround mode
manually (see page 42).
Available Surround and DSP modes according to the incoming signal
The name of the mode shown below is the display indication.
Modes
Surround modes DSP modes HEADPHONE mode
Surround/DSP
Incoming signal
off
Dolby Digital (multi-channel) DOLBY D
Dolby Digital Surround EX
DOLBY D
HALL1/2, LIVE CLUB,
(Virtual Surround Back*1)
DANCE CLUB, PAVILION,
DTS (multi-channel) DTS THEATRE1/2, ALL CH ST*2
DTS-ES
DTS
HEADPHONE, SURRND OFF
(Virtual Surround Back)
3D HEADPHONE (stereo)
Dual Mono DUAL MONO HALL1/2, LIVE CLUB,
Dolby Digital (2-channel) DANCE CLUB, PAVILION,
DTS (2-channel) PLII MOVIE, PLII MUSIC THEATRE1/2, MONO FILM,
Linear PCM ALL CH ST*2
Analogue
*1 Virtual Surround Back may not be applied to some software.
*2 Not selectable if the surround speakers are set to “NO” in the speaker setting (see page 21).
Virtual Surround Back
When playing Dolby Digital Surround EX or DTS-ES
software, you can enjoy surround back channel playback using
the Virtual Surround Back.
Ex.: When playing back DTS-ES software.
To activate the Virtual Surround Back, see page 22.
EQ
LPCM L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
CR
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST SLEEP
AUTO MUTING AUTO MODE
ATT
HP
MHz
kHz
EN38-43RXF31S[B]f.p65 05.4.15, 14:5943