Filter
Top Products
18
SUBWOOFER (SUBWOOFER)
Register your subwoofer. (21)
FRONT SPK (FRONT SPK)
Register your front speaker size. (21)
CENTER SPK (CENTER SPK)
Register your center speaker size. (21)
SURR. SPK (SURRND SPK)
Register your surround speaker size. (21)
DISTANCE UNIT (DIST UNIT)
Select the measuring unit for the speaker distance. (22)
FL SPK DISTANCE (FRNT L DIST)*
Register the distance from the left front speaker to your
listening point. (22)
FR SPK DISTANCE (FRNT R DIST)*
Register the distance from the right front speaker to your
listening point. (22)
C SPK DISTANCE (CENTER DIST)*
Register the distance from the center speaker to your listening
point. (22)
LS SPK DISTANCE (SURR L DIST)*
Register the distance from the left surround speaker to your
listening point. (22)
RS SPK DISTANCE (SURR R DIST)*
Register the distance from the right surround speaker to your
listening point. (22)
VIRTUAL SB (VIRTUAL SB)
Set the virtual surround back speaker. (22)
DUAL MONO (DUAL MONO)
Select the Dual Mono sound channel. (22)
SUBWFR OUT (SUBWFR OUT)
Select sounds emitted from the subwoofer. (23)
CROSSOVER (CROSSOVER)
Select the cutoff frequency to the subwoofer. (23)
LFE ATT (LFE ATT)
Attenuate the bass (LFE) sounds. (23)
MIDNIGHT (MIDNIGHT)
Reproduce a powerful sound at night. (23)
DIGITAL IN 1 (DIGITAL IN1)
Select the component connected to the digital coaxial
terminal—1(DVR/DVD). (24)
DIGITAL IN 2 (DIGITAL IN2)
Select the component connected to the digital optical
terminal—2(VIDEO). (24)
DIGITAL IN 3 (DIGITAL IN3)
Select the component connected to the digital optical
terminal—3(TV). (24)
AUTO MODE (AUTO MODE)
Select Auto Function mode. (24)
DVD VIDEO (DVD VIDEO)
Select the type of the signal transmitted from the DVD
recorder or DVD player. (25)
VCR VIDEO (VCR VIDEO)
Select the type of the signal transmitted from the VCR. (25)
SUPERIMPOSE (SUPERIMPOSE)
Select to superimpose the menus on the TV screen. (25)
DOWN MIX (DOWN MIX)
Select to convert S-video signals into composite video signals.
(25)
Y/C SEPARATE (Y/C SEP.)
Select to convert composite video signals into S-video signals.
(25)
Items and to do
Basic setting items
You can adjust the following items. See pages in parentheses for details.
•You cannot select the items which is not available with the current setting.
•The name of the item shown below is the on-screen display indication and the name in parentheses is the display indication.
* If you have used Smart Surround Setup on pages 16 and 17, these settings are not required.
NOTE
Adjusting the items may blur the picture when you view the playback picture through RGB connection. If it occurs, set “SUPERIMPOSE”
to “SUPERIMPOSE: ON” (see page 25).
Button / JOG To do
SETTING button show setting item previously selected.
SET button move to the selected menu or return to the
previous SETTING MENU.
MULTI JOG •select a menu or an item.
• change a setting.
Operation through on-screen display menus
You can make adjustments to the basic settings easily by using the on-screen display menus.
Menu operation buttons
On the front panel:
Button To do
MENU button show “TOP MENU.”
5 / ∞ buttons select a menu or an item.
SET button move to the selected menu or return to the
previous SETTING MENU.
2 / 3 buttons change a setting.
When operating the receiver
using the remote control,
set the mode selector to
“AUDIO/TV/VCR/STB.”
From the remote control:
EN16-25RXF31S[B]f.p65 05.4.14, 20:0218