Filter
Top Products
26
Operation through on-screen display menus
You can make adjustments to the basic settings easily by using the on-screen display menus.
Menu operation buttons
On the front panel:
Sound adjustments
You can make sound adjustment to your preference after
completing basic setting.
Basic adjustment items
You can adjust the following items. See pages in parentheses for details.
•You cannot select the items which is not available with the current setting.
•The name of the item shown below is the on-screen display indication and the name in parentheses is the display indication.
* If you have used Smart Surround Setup on pages 16 and 17, these settings are not required.
NOTE
Adjusting the items may blur the picture when you view the playback picture through RGB connection. If it occurs, set “SUPERIMPOSE”
to “SUPERIMPOSE: ON” (see page 25).
When operating the receiver
using the remote control,
set the mode selector to
“AUDIO/TV/VCR/STB.”
From the remote control:
Button / JOG To do
ADJUST button show adjustment item previously selected.
SET button move to the selected menu or return to the
previous ADJUST MENU.
MULTI JOG •select a menu or an item.
• change a setting.
Button To do
MENU button show “TOP MENU.”
5 / ∞ buttons select a menu or an item.
SET button move to the selected menu or return to the
previous ADJUST MENU.
2 / 3 buttons change a setting.
SUBWOOFER LEVEL (SUBWFR LVL)
Adjust the subwoofer output level. (29)
FRONT L LEVEL (FRONT L LVL)
Adjust the left front speaker output level. (29)
FRONT R LEVEL (FRONT R LVL)
Adjust the right front speaker output level. (29)
CENTER LEVEL (CENTER LVL)
Adjust the center speaker output level. (29)
SURR. L LEVEL (SURR L LVL)
Adjust the left surround speaker output level. (29)
SURR. R LEVEL (SURR R LVL)
Adjust the right surround speaker output level. (29)
DIGITAL EQ 63Hz (D EQ 63Hz)*
DIGITAL EQ 250Hz (D EQ 250Hz)*
DIGITAL EQ 1kHz (D EQ 1kHz)*
DIGITAL EQ 4kHz (D EQ 4kHz)*
DIGITAL EQ 16kHz (D EQ 16kHz)*
Adjust the equalization pattern of each band. (30)
BASS BOOST (BASS BOOST)
Boost the bass level. (30)
SUBWFR PHASE (SBWFR PHASE)
Select the subwoofer sound phase. (30)
INPUT ATT (INPUT ATT)
Attenuate the input level of analogue source. (30)
EFFECT (EFFECT)
Adjust the effect level. (31)
PANORAMA (PANORAMA)
Add wraparound sound effect with side-wall image. (31)
CENTER TONE (CENTER TONE)
Make the center tone soft or sharp. (31)
CNTR ALIGNMENT (CNTR ALIGN)
Align the vertical localization of the center channel. (31)
Items and to do
EN26-31RXF31S[B]f.p65 05.4.14, 20:0226