Filter
Top Products
4
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.
Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System.
Right speaker (rear side) Left speaker (rear side)
CAUTION: A TV may display irregular colors if located near the speakers. If this happens, set the speak-
ers away from the TV.
Turntable (or MD player)
To listen to this source, press the AUX button.
Firmly insert the supplied AC power cord into the AC inlet on the back of the System.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE
TO THE UNIT.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT
IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!
Connecting the Speakers
Connecting Auxiliary Equipment
Connecting the AC Power Cord
RIGHT LEFT
12 3
Black
R
L
AUX
Signal cord (optional)
Turntable (with built-in equalizer) or MD player
(optional)
Pin-plug x 2
Pin-plug x 2
AC IN
Power cord
UX-Eng.fm Page 4 Thursday, March 5, 1998 6:42 PM