JVC LVT0027-005A Stereo System User Manual


 
16
English
Using the Timers
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
MULTI JOG dial
TIMER/SNOOZE
CLOCK
SLEEP
Timer indicator
Clock, time-on time etc.
The timers let you control listening and recording functions auto-
matically.
The clock must be correctly set for the timers to work.
You can set the clock whether the Unit is on or off.
1. Press the CLOCK button on the Unit for
more than two seconds.
Set the hour and minute within two minutes respectively. Other-
wise, setting is cleared and must be repeated from the beginning.
2. Turn the MULTI JOG dial to the right or left
to increase or decrease the hour.
The hour changes with every two clicks of the dial.
3. Press the CLOCK button.
The minute digits blink on the display.
4. Turn the MULTI JOG dial to the right or left
to increase or decrease the minute.
The minute changes with every two clicks of the dial.
5. Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
CAUTION: If there is a power failure, the clock
loses its setting. The display shows “0:00” and
the “CLOCK” indicator blinks, and the clock must
be reset.
You can set the Timer whether the Unit is on or off.
1. Press the TIMER/SNOOZE button on the
Unit for more than two seconds.
The Timer indicator and “ON” indicator light up and the hour
digits blink on the display.
Perform each setting within 30 seconds. Otherwise, setting is
cleared and must be repeated from the beginning.
2. Set the time you want the Unit to come on.
(Example: To set the timer to 12:15)
1. Set the hour by turning the MULTI
JOG dial to the right or left in the same
way you set the time for the clock.
2. Press the TIMER/SNOOZE button.
3. Set the minute by turning the MULTI
JOG dial to the right or left.
4. Press the TIMER/SNOOZE button.
The “ON” indicator goes out and the “OFF” indicator lights
up on the display.
3. Set the time you want the Unit to be turned
off.
(Example: To set the timer stop time to 13:15)
1. Set the hour by turning the MULTI
JOG dial.
2. Press the TIMER/SNOOZE button.
3. Set the minute by turning the MULTI
JOG dial.
4. Press the TIMER/SNOOZE button.
The “TUNER” blinks on the display.
4. Turn the MULTI JOG dial to
the right or left to select the
source.
The display changes as shown.
Ô
TUNER
Ô
TUNER REC
Ô
CD
Ô
TAPE
Ô
TUNER:
Selects the last station you were listening to.
TUNER REC:
Records the last station you were listening to.
CD:
Plays the CD.
TAPE:
Plays the tape.
Setting the Clock
Setting the Timer
UX-Eng.fm Page 16 Thursday, March 5, 1998 6:42 PM