JVC LVT0027-005A Stereo System User Manual


 
13
English
Using the Cassette Deck
(Listening to a Tape)
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
T
APE 2 3
REVERSE
MODE
4 REW
¢ FF
7
0
(EJECT)
TAPE
2 3
4
¢
7
Tape Direction indicator
Reverse Mode indicator
The Cassette Deck allows you to play and record audio tapes.
With Automatic Tape Detection, you can listen to type I, II or
IV tapes without having to change any settings.
One Touch Play ——————————
By pressing the TAPE ` button on the Unit or the Remote Control,
the Unit will come on, “TAPE” appears in the display, and if a tape
is in the deck, it will start to play. If no tape is loaded, the Unit will
come on and wait for you to insert a tape, or select another function.
When the power is already on, you can use this basic procedure:
1. Press the 0 (EJECT) button.
2. When the cassette holder opens, put the
cassette in, with the exposed part of the
tape down, toward the base of the System.
If the cassette holder does not open, turn the Unit off, then
back on and press the
0 (EJECT) button again.
3. Close the holder gently until it clicks.
4. Press the TAPE ` button.
The tape is played in the direction shown by the Tape Direction
indicator.
5. If you need to change the playback direc-
tion, press the TAPE ` again.
The opposite side Tape Direction indicator lights up and the
tape playback direction changes.
To stop playing,
press the ebutton.
To remove the tape,
stop the tape, and press the
0 (EJECT) but-
ton.
To Fast-Forward And Rewind A Tape
Press the ¢ (fast-forward) button on the Unit or the Remote
Control to fast-forward the tape.
Press the 4 (rewind) button on the Unit or the Remote Control
to rewind the tape.
The Cassette Deck automatically stops when the tape reach-
es its end.
You can set a tape to play just one side, both sides in succession, or
both sides continuously.
Press the REVERSE MODE button on the Re-
mote Control.
The indicator changes with each press of the button as shown.
=== = (back to the beginning)
: The Cassette Deck automatically stops after playing
one side of the tape.
: The Cassette Deck automatically stops after playing
both sides of the tape.
: The Cassette Deck continues to play both sides of the
tape until the e button is pressed.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes eas-
ily jam in the pinch-rollers and the capstans.
Regular Play
Reverse Mode
UX-Eng.fm Page 13 Thursday, March 5, 1998 6:42 PM