Filter
Top Products
12
English
Locating a Track with the Remote
Control Directly ——————————
Using the number keys on the Remote Control allows you to go di-
rectly to the beginning of any track.
During playback, enter the number of the track you want to listen to
using the number keys.
The selected track starts playing.
• Example: for track 5, press 5. For track 15, press +10 then
5. For track 20, press +10, then 10. For track 32, press +10
three times, then 2.
You can program the playing order of the tracks using the Remote
Control.
■ You can program up to 20 tracks in any desired order.
■ You can only make a program when the CD Player is stopped.
■
1. Insert a CD.
■
2. Press the CD
6
button.
■
3. Press the
e
button to stop the CD.
■
4. Press the PROGRAM button.
The Unit enters the programming mode and the “PROGRAM”
indicator lights up.
■
5. Press the number keys (1 to 10 and +10) to
select the track to program.
• Example: for track 2, press 2. For track 15, press +10 then
5. For track 20, press +10 then 10.
■
6. Repeat step 5 to select the other tracks for
the program.
You can see the total playback time of programmed tracks in the
display.
■
7. Press the CD
6
button.
The Unit plays the tracks in the order you have programmed
them.
■ You can skip to a particular program track by pressing the 4
or
¢ button during program play.
To confirm the programmed tracks,
Press the PROGRAM
button; the tracks making up the program will be displayed in pro-
grammed order.
To stop playing,
press the e button once.
To delete all the tracks in a program,
press the e button on
the Unit or the Remote Control while the CD Player is stopped. The
“PROGRAM” indicator goes out and the program is deleted. Nor-
mal Play is resumed.
The program will also be deleted when you press the OPEN
0 but-
ton to open the CD holder.
Note:
If the total playback time of the programmed tracks exceeds
99 minutes 59 seconds, or if more than 21 tracks are pro-
grammed, the total playback time will go out on the display.
The tracks will play in no special order when you use this mode.
Press the RANDOM button on the Remote
Control.
Playback automatically starts and the “RANDOM” indicator lights
up on the display.
To skip a track during playback,
press the
¢ button to jump
to the next track in the random sequence. Press the
4 button to
jump back to the start of a track being played.
To cancel random play,
press the RANDOM button again. The
“RANDOM” indicator goes out and Normal Play is resumed.
You can set the program or individual track playing to repeat as
many times as you like.
Press the REPEAT button on the Remote
Control.
The display changes with each press of the button, as shown below.
= =
ALL
= blank display = (back to the beginning)
: Repeats one track.
ALL
: In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in the
program.
To exit Repeat Mode,
press the REPEAT button until the “RE-
PEAT” mode indicator on the display goes out.
Programming the
Playing Order of the Tracks
The total playback time of
programmed tracks
Random Play
Repeating Tracks
Track number
Program order number
UX-Eng.fm Page 12 Thursday, March 5, 1998 6:42 PM