JVC LVT0027-005A Stereo System User Manual


 
17
English
5.Press the TIMER/SNOOZE
button.
The volume level blinks on the display.
6. Turn the MULTI JOG dial to the right or left
to select the volume level (0 to 50).
7. Press the TIMER/SNOOZE button.
The timer setting is completed and the display returns to the dis-
play before you set the timer.
8. Before turning off the Unit, prepare the
music source selected in step 4.
TUNER:
Tune to the desired station.
TUNER REC:
Tune to the desired station and insert a cassette
tape for recording the station.
CD:
Insert a CD.
TAPE:
Insert a prerecorded cassette tape.
In the source “TUNER”, “CD”, or “TAPE”, the timer acts
as a Daily timer, and having been set will be activated at the
same time every day until the setting is turned off. In the
source “TUNER REC”, the timer acts as a Once timer. Hav-
ing been performed, the details of the setting remain stored
but the Timer status is set to off. To re-activate the Once
timer, press the TIMER/SNOOZE button for more than two
seconds. Press the TIMER/SNOOZE button until the dis-
play returns to the original display before setting the time.
9. Press the button to turn off the Unit.
To cancel the timer,
press the TIMER/SNOOZE button for more
than two seconds until the Timer indicator goes out on the display.
To re-activate the cancelled timer,
press the TIMER/
SNOOZE button for more than two seconds until the Timer indica-
tor lights up on the display. Press the TIMER/SNOOZE button until
the display returns to the original display before setting the time.
To confirm the timer settings,
cancel the timer once and then
activate the timer again by pressing the TIMER/SNOOZE button
for more than two seconds.
Press the TIMER/SNOOZE button repeatedly, and you can see the
current timer settings (ON time, OFF time, source, and volume).
To change the timer setting,
repeat the setting procedure from
the beginning.
When the timer turns on, it is possible to fade in the sound from
volume level 0 (zero) to the preset volume.
When the volume setting is set to “VOLUME-” (volume level
is not specified), the timer playback volume is set to the level
used before setting the timer.
CAUTION: If the Unit is unplugged, or a power fail-
ure occurs, the clock and timer setting will be
lost after about 24 hours. You will need to reset
the clock first, then the timer.
5-Minute Snoozing —————————
When the timer turns on the music source you can, if you wish, ac-
tivate the 5-minute snoozing function to temporarily stop playback:
Press the TIMER/SNOOZE button on the Unit.
The power is turned off for five minutes for snoozing.
Use the Sleep Timer to turn the Unit off after a certain number of
minutes when it is playing. By setting this timer, you can fall asleep
to music and know that your Unit will turn off by itself rather than
play all night.
You can only set the Sleep Timer when the Unit is on and a
source is playing.
To set the SLEEP Timer, follow this proce-
dure:
1. With the System on and a source playing,
press the SLEEP button on the Remote
Control.
The “SLEEP” indicator lights up.
2. Set the length of time you want the source
to play before shutting off.
Each time you press the SLEEP button, it changes the
number of minutes shown on the display in this sequence:
=
30
=
60
=
90
=
120
=
Cancelled
= (back to the be-
ginning)
After setting the number of minutes for the Sleep Timer, the display
will stop blinking after 5 seconds and return to the display as before
setting the Sleep Timer.
The Unit is now set to turn off after the number of minutes you set.
To Confirm the Sleep Time
When the SLEEP button is pressed, the remaining sleep time is dis-
played. If it is pressed again, a new sleep time can be set.
To Cancel the SLEEP Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the
display.
Turning off the Unit also cancels the SLEEP Timer.
Setting the SLEEP Timer
UX-Eng.fm Page 17 Thursday, March 5, 1998 6:42 PM