Filter
Top Products
63
ENGLISH
3
Start searching for an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
To tune in to a particular ensemble
without searching
1 Press SRC repeatedly to select DAB tuner as
the source.
2 Press and hold SRC for more than 1 second.
3 Press SRC repeatedly to select the DAB
band (DAB1, DAB2, or DAB3).
4 Press and hold ¢ or 4 for more
than one second.
5 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
6 Press 5 (up) or ∞ (down) to select a service
(either primary or secondary) you want to
listen to.
When noises generated while running
interfere with your listening
While driving, surrounding sounds will interfere
with your listening. Especially the low level
sounds will be hard to listen.
If this happens, you can reinforce the low level
sounds to improve your listening.
For this purpose, some service provides
Dynamic Range Control signals together with
their regular program signals.
1 Press MODE (M) while listening to
a DAB service.
“Mode” appears on the display, and
the number buttons start flashing.
2 Press number button 1 repeatedly to activate
the DRC function while “Mode” is still on the
display.
Each time you press the button, the DRC
function will be set as follows:
As the number increases, the DRC effect level
also increases.
• The DRC indicator will be highlighted
( ) only when the unit received DRC
signals from the tuned service.
To cancel the DRC effect, select “DRC Off.”
Press ¢ to search for
ensembles of higher
frequency.
Press 4 to search for
ensembles of lower
frequency.
Press 5 (up) to select the
next service. (If a primary
service has some secondary
services, they are selected
before the next primary
service is selected.)
Press ∞ (down) to select the
previous service (either
primary or secondary).
DRC 1 DRC 2
DRC Off
DRC 3
M
MODE
345621
After about
5 seconds
The display returns to the source indication
screen.
DRC indicator appears
EN62-70SH9101[E_EX]f.p65 03.2.27, 23:2963