Filter
Top Products
18
ENGLISH
Note:
After turning on PTY Standby Reception, you can
change the source without canceling PTY Standby
Reception. In this case, the PTY indicator stops
flashing if it was. If a station starts broadcasting the
selected PTY programme, this unit automatically
changes the source and tunes in to the station.
• If you change the source to AM, PTY Standby
Reception will be temporarily canceled.
• You can only deactivate the PTY Standby Reception
when the source is FM.
Searching your favorite programme
You can search any one of the PTY codes.
In addition, you can store your 6 favorite
programme types in the number buttons.
When shipped from the factory, the following
6 programme types have been stored in the
number buttons (1 to 6).
To store your favorite programme types, see
below and page 19.
To search your favorite programme type, see
page 19.
To store your favorite programme types
1
Press and hold T/P for more than 2
seconds while listening to an FM
station.
The last selected PTY code appears.
Pop M
1
2
3
Rock M Easy M
45
6
Classics
Affairs
Varied
T/P
345621
Ex.: When the currently selected PTY code
for PTY Standby Reception is “News”
After about
5 seconds
The display returns to the source indication
screen.
PTY indicator appears
(either lights up or flashes)
2 Press number button 3 repeatedly to activate
PTY Standby Reception while “Mode” is still
on the display.
Each time you press the button, PTY Standby
Reception turns on and off alternately.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
If a station starts broadcasting the selected
PTY programme, this unit automatically tunes
in to the station.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated since the station
being received does not provide the signals
used for PTY Standby Reception.
To activate PTY Standby Reception, you need
to tune in to another station providing these
signals. Press ¢ or 4 to search for
such a station.
When a station providing these signals is tuned
in, the PTY indicator stops flashing and
remains lit. Now PTY Standby Reception is
activated.
EN15-21SH9101[E_EX]f.p65 03.2.27, 22:5518