Filter
Top Products
40
ENGLISH
6
M
MODE
1
Open the control panel.
2
Insert a CD-ROM with the files (images
and animations) into the loading slot.
The unit draws the
disc, the control panel
goes back to the
previous position (see
page 52).
• If the disc includes playable audio files
such as MP3 tracks, playback starts
automatically.
3
Press MODE (M) after the disc is
detected.
“Mode” appears on the
display, then the number
buttons and the 5 (up)/
∞ (down) buttons start
flashing.
4
Press number button 6 to show the
download selection screen.
Downloading images and
animations
Before starting the following procedure, prepare a
CD-ROM including still images (pictures) and
animations (movies).
• The supplied Image Converter CD-ROM
includes sample images and animations, so
you can use this disc as your first trial.
IMPORTANT:
• Still images (pictures) should have <jml>,
and animations (movies) should have <jma>
as their extension code in their file names.
• Downloading a file can be done only while
selecting “CD” as the source; on the other
hand, deleting a file can be done while
selecting any source.
• Before you download or erase the files,
observe the following:
– Do not download a file while driving.
– Do not turn off the ignition key of the car
while downloading or erasing a file.*
– Do not detach the control panel while
downloading or erasing a file.*
* If you do it, the file download or erasure will
not be done correctly. In this case, perform
the same procedure again.
• If you have already downloaded an
animation for “PowerOn,” “PowerOff,” or
“Movie,” downloading a new animation
deletes the previously stored animation.
• It takes a long time for the unit to download
an animation.
– About 6 to 7 seconds for a still image (one
frame).
– About 3 to 4 minutes for an animation of 30
frames.
– About 10 minutes for an animation of 90
frames.
• While a station (or service for the DAB tuner)
is being tuned in by one of the Standby
Reception modes such as TA, PTY, or
Announcement, you cannot download or
delete a file. On the other hand, while you
are downloading or deleting a file, no
Standby Reception mode will work to have
this unit tune in a station (or service). It only
works after download or deletion is over.
345621
EN39-45SH9101[E_EX]f.p65 03.2.27, 23:0440