Filter
Top Products
61
ENGLISH
EXTERNAL COMPONENT OPERATIONS
SRC
ATT
3456 M21
D
SRC
DISP
ATT
SEL
T/P
MODE
3
Adjust the volume.
4
Select the DSP mode and sound
mode as you want.
• For the DSP modes, see page 32.
• For the sound (iEQ) modes, see page 35.
Note:
When the source is “LINE IN,” the DISP (D) button
will not work.
If you have assigned a different name to the
external component, it will appear.
Playing an external component
You can connect an external components to the
LINE IN plugs on the rear.
• If you cannot select “LINE IN” as the source,
change the “Line In” setting to “On.” (See page
49.)
1
Select the external component
(LINE IN).
Each time you press the
button, the source changes
as described on page 7.
When you select a source,
the power automatically
comes on.
2
Turn on the connected component
and start playing the source.
EN61-61SH9101[E_EX]f.p65 03.2.27, 23:2261