Filter
Top Products
24
ENGLISH
Press
¢ briefly, while
playing a disc, to go ahead to
the beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
Press
4 briefly, while playing a disc, to go
back to the beginning of the current track.
Each time you press the button consecutively, the
beginning of the previous tracks is located and
played back.
What is ImageLink
When an MP3 or a WMA folder includes an
image <jml> file edited by Image Converter
(supplied in the CD-ROM), you can show the
image on the display while the tracks in the
folder are played back.
• While reading an image <jml> file, no
sounds come out (the preset image of a
coffee cup is shown on the display during
this period).
To activate ImageLink, follow the procedure
below
• See also “Changing the general settings
(PSM)” on page 46.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
2 Press number button 1 to select “MOVIE” —
Movie category of the PSM settings.
The “Graphics” setting screen appears on
the display.
3 Turn the control dial to select “ImageLink.”
4 Press SEL (select) to finish the setting.
ImageLink starts functioning when the next
folder starts playing.
Note:
ImageLink will not work in the following cases:
• If no <jml> file is included in an MP3/WMA
folder.
• If Intro Scan is activated.
• If the source is changed to another from “CD,” or
• If you turn off then on the unit while the preset
image of a coffee cup is shown on the display.
Locating a particular portion
on a track
To fast-forward or reverse the track
Note:
During this operation on an MP3 or WMA disc, you
can only hear intermittent sounds. (The elapsed
playing time also changes intermittently on the
display.)
To go to the next or previous tracks
Press and hold
¢ , while
playing a disc, to fast-forward the
track.
Press and hold
4 , while
playing a disc, to reverse the
track.
If there are more than one <jml> file in a folder, a
<jml> file with younger playback order number
will be shown on the display (in the above
example, “Photo2.jml” will be used for Album 2).
Album 1
(Folder 1)
Music001.mp3
Music002.mp3
Music003.mp3
Photo1.jml
Photo1.jml
Photo2.jml
Album 2
(Folder 2)
Music004.wma
Music005.mp3
Music006.wma
Photo2.jml
Photo3.jml
Display window
Display window
EN22-31SH9101[E_EX]f.p65 03.2.27, 22:5624